SF74D6-C

Flat Swivel Units
Series SF-C

"The superior"

  • Up to 100% more performance than the benchmark
    Superior end position damping lets you swivel more mass in the shortest amount of time, increasing your machine's component output
  • Large centre bore
    Reduce the interference contours in your application by placing your power supply line directly through the middle of the rotary flange
  • More than 100% higher radial bearing load than the benchmark
    The generously scaled bearings stand for robustness and long service life and provide the highest process reliability for your application
Equipment/Options
  • 10 million maintenance-free cycles (max.)
  • Powerstop end position damping
  • Fluid feed-through
  • IP64
  • Magnetic field sensor
  • Inductive sensor
  • Positionability - 2 positions
  • Adjustable swivel angle
  • Flange
  • Swivel angle 180° freely adjustable
  • End positions adjustable +/- 3
Technical Data
Swivel angle0-180 [°]
Torque4.5 [Nm]
Pneumatic energy transfer6 [Quantity]
Swivel angle regulable +/-180 [°]
Passage bore Ø12 [mm]
Axial bearing load1120 [N]
Radial bearing load88 [Nm]
Repetition accuracy +/-0.01 [°]
Operating pressure min.3 [bar]
Operating pressure max.8 [bar]
Nominal operating pressure6 [bar]
Operating temperature min.5 [°C]
Operating temperature max.+80 [°C]
Air volume per cycle84 [cm³]
Protection to IEC 60529IP64
Weight2.2 [kg]
Benefits in detail
  1. Two way ball bearing hollow shaft
    for feedthrough cables and hoses high forces and moments capacity
  2. Up to 8 way integrated air feed-through
    for hoseless air transfer hose package does not have to be pivoted
  3. Adjustable end position
    +/- 3° adjustable end position
  4. Large, precise locating flange
    simple tool connection
  5. Integrated shock absorbers with spiral groove technology
    adjustable end position damping heating is prevented through installation in pneumatic pressure chamber
  6. Air flow control valve
    for speed regulation (included in the delivery)
  7. Force transfer
    rack and pinion
  8. Drive
    two double-acting pneumatic cylinders high torque rating