About us
Technologies & Components
- Handling technology
  Grippers
  
  pneumatic
  
  pneumatic
  
  pneumatically intelligent
  
  pneumatically intelligent
  
  electric
  
  electric
  
  HRC
  
  HRC
  
  Grippers
  
  Rotary grippers
  
  2-jaw parallel rotary grippers
  
  2-jaw parallel rotary grippers
  
  Series DGP400 - 2-Jaw Parallel Rotary Grippers
  Rotation angle 90° or 180° individually adjustable
  Double acting pneumatic cylinder
  
  2-jaw angular gripper
  
  2-jaw angular gripper
  
  Series DGK - 2-Jaw Angular Rotary Grippers
  Magnetic field sensors for sensing of the piston position
  Double acting pneumatic cylinder
  
  Rotary grippers
  
  Swivel and rotary modules
  
  Pneumatic
  
  Pneumatic
  
  Electric
  
  Electric
  
  Swivel and rotary modules
  
  MATCH - Tool changer with end effector
  
  Fixed part
  
  Fixed part
  
  end effector lot
  
  end effector lot
  
  MATCH - Tool changer with end effector
  
  Robot accessories
  
  Tool changer
  
  Tool changer
  
  Tool Changers
  Tool changers for handling weights up to 1000 Kg
  Versatile energy elements available as accessory
  
  Rotary distributor
  
  Rotary distributor
  
  Rotary Distributors
  Partial mounting circle in accordance with EN ISO 9409-1
  Equipped with electric and pneumatic feedthrough
  
  Axis compensation modules
  
  Axis compensation modules
  
  Axis Compensation Modules
  Compensation of position errors
  Partial mounting circle in accordance with EN ISO 9409-1
  
  Collision protection
  
  Collision protection
  
  Crash Protection
  Protection for robots and handling systems from damages caused by collision or overload
  The operating pressure regulates the contact sensitivity
  
  Angle flange
  
  Angle flange
  
  Energy Elements
  
  Energy Elements
  
  Energy elements
  standardised and packaged
  short set up time for maintenance work
  custom-specifically modifiable
  
  Communication
  
  Communication
  
  Robot accessories
  
  Linear modules
  
  Linear cylinders
  
  Linear cylinders
  
  Linear Cylinders
  Maximum drive force in the extended and retract movement of 950N
  
  Linear rail slide
  
  Linear rail slide
  
  Linear Rail Slides
  Maximum drive force in the extended and retract movement of 750 N
  
  Lifting cylinders
  
  Lifting cylinders
  
  Lifting Cylinders
  Recommended at 10 mil. cycles
  Maximum drive force in the extended and retract movement of 720 N
  
  Linear modules
  
  Vacuum components
  
  Suction cups
  
  Suction cups
  
  Suction Cups
  Universal applicable suction cups for a wide range of requirements
  Available in different materials
  
  Adapters
  
  Adapters
  
  Adapters
  For the connection of suction cups to the customer-specific application
  Various designs available
  
  Adapters + Compensation modules
  
  Adapters + Compensation modules
  
  Adapters + Compensation Modules
  To compensate height differences and slope surfaces
  Various designs available
  
  Compensation modules
  
  Compensation modules
  
  Vacuum generator
  
  Vacuum generator
  
  Vacuum Generators
  Basic ejectors, Multi-stage ejectors and Compact ejectors available
  Low weight, quick build-up of the vacuum
  
  Query
  
  Query
  
  Sensing Units
  For the safe operation of the vacuum system
  Mechanical and electrical sensing units available
  
  Handling components
  
  Handling components
  
  MCS modular construction system
  
  MCS modular construction system
  
  MCS Modular Construction System
  Modular Construction System
  Components for the design of an individual gripper system
  Profiles, Connections, Clamps, Suction cups
  
  Accessories
  
  Accessories
  
  Accessories
  Accessories for the vacuum programm
  
  Vacuum components
  
  Cutting tongs
  
  Series ZK1000
  
  Series ZK1000
  
  Series ZK1000
  Cutting inserts available with different options
  Position sensing possible by magnetic field sensor
  
  Series ZK
  
  Series ZK
  
  Series ZK
  Closing force up to 6800 N
  Optimum integration in the workspace due to individual installation position
  
  Cutting tongs
  
  Separators
  
  Pneumatic
  
  Pneumatic
  
  Separators
  
  Ball joints
  
  Series KG
  
  Series KG
  
  Series KG
  All side articulated connection with lockable position
  High moment capacity
  
  Ball joints
  
  Adjustment jaws
  
  Series EB5000
  
  Series EB5000
  
  Series EB5000
  Easy gripper finger adjustment to fit various workpieces saves time and money
  
  Adjustment jaws
  
  Sensors and holders
  
  Magnetic field sensors
  
  Magnetic field sensors
  
  Magnetic Field Sensors
  Non-contacting and wear-free for long service life
  Space-saving installation
  
  Inductive sensors
  
  Inductive sensors
  
  Inductive Proximity Switches
  Available starting at Ø 3 mm
  Non-contacting, wear-free
  
  Connecting cables
  
  Connecting cables
  
  Sensor Cables
  Suitable for cable tracks
  Free from halogen, silicone and PVC UL/CSA
  
  Stop stroke adjustment screws
  
  Stop stroke adjustment screws
  
  Stop Stroke Adjustment Screws
  Mounting for inductive proximity switch
  
  Holders
  
  Holders
  
  Holders
  mounting for inductive proximity switch
  
  Sensors and holders
  
  Accessories
  
  Pressure piece
  
  Pressure piece
  
  Compensation module
  
  Compensation module
  
  Sets of jaws
  
  Sets of jaws
  
  Jaw Accessories
  Rubber and Hard Jaw Inserts, Rubber Jaws Liners, Rubber Tape, Epoxy Jaw Compound
  
  Jaw extensions
  
  Jaw extensions
  
  Jaw Extensions
  
  Rotary distributor
  
  Rotary distributor
  
  Pneumatic Rotary Manifolds
  with 2 or 4 air feed throughs
  
  Cables and plugs
  
  Cables and plugs
  
  Communication
  
  Communication
  
  Universal jaw
  
  Universal jaw
  
  Valves
  
  Valves
  
  Valves
  Flow Control Valves with Swivel joint, Pressure Safety Valve, Quick Exhaust Valve
  
  Connectors
  
  Connectors
  
  Fittings
  Straight Fittings, Angled Fittings, Straight Fittings - Barb Style Connection
  
  Changeable jaw
  
  Changeable jaw
  
  Accessories
  
  Handling technology
- Damping technology
  Industrial damping technology
  
  PowerStop industrial shock absorber
  
  PowerStop industrial shock absorber
  
  PowerStop industrial shock absorbers
  Highest quality for the most extreme requirements and loads
  High power consumption thanks to maximum utilization in each piston position
  Customized damping characteristic design for customer-specific solutions
  Low-vibration and precise braking due to the constantly narrowing spiral groove
  Longer service life and high operating safety thanks to the oil reserve
  
  BasicStop structural dampers
  
  BasicStop structural dampers
  
  Industrial shock absorbers BasicStop
  High energy absorption at a high damping rate
  High durability and resistance to all media
  Three series in various sizes and hardness grades
  Expertise in design and production at Zimmer - customized designs are possible
  Its molecular structure and geometric design with memory effect are matched to
  the application area
  Thermoplastic elastomer on a copolyester base (TPC)
  
  Accessories
  
  Accessories
  
  Industrial damping technology
  
  Soft Close
  
  Soft Close
  
  Damping technology
- Linear technology
  Clamping and braking elements
  
  For profile rail guides
  
  For profile rail guides
  
  For circular and shaft guides
  
  For circular and shaft guides
  
  Clamping and braking elements
  
  Linear technology
- Machine tooling technology
  SPN Zero-Point Clamping System
  
  Advanced
  
  Advanced
  
  Standard
  
  Standard
  
  Clamping plates
  
  Clamping plates
  
  SPN Zero-Point Clamping System
  
  Machine tooling technology
- Process technology
  MIM technology
  
  MIM technology
  
  Plastic components
  
  Plastic components
  
  Elastomer technology
  
  Elastomer technology
  
  Manual clamping system
  
  Manual clamping system
  
  Process technology
- System technology
  
  System technology
- Digital Services
  
  Digital Services
- Match
  
  Match
- Robotic
  Easy to use package / startZ
  
  PLUG&WORK STARTERBOX
  
  PLUG&WORK STARTERBOX
  
  Easy to use package / startZ
  
  Robotic
- FAQ
  
  FAQ
Technologies & Components
Productfinder
Clamping and braking elements Industrial damping technology Soft Close System-Showroom
Expo
Service
Career
Contact
Search

Holders

Series KB

Mounting for inductive proximity switch
Available starting at Ø 3 mm

contact

to the top