Internal gripper
Series LGG
- Surface protection with rubber knobs
Continuously protect the surface of your workpieces and minimise rejections in the process - Secure hold
The coefficient of friction ensures your workpiece stays held reliably, even under high dynamics - Direct drive
The control system with only one pneumatic line reduces installation effort and interference contours
Series features
IP54
Maintenance free
Installation Size: LG15-18 | ||||
| Order-No. | Total stroke in Ø | Clamping diameter d min. | Clamping diameter D max. | |
|---|---|---|---|---|
| LG15-18 | 2.5 [mm] | 15.0 [mm] | 17.5 [mm] | |
Installation Size: LG18-22 | ||||
| Order-No. | Total stroke in Ø | Clamping diameter d min. | Clamping diameter D max. | |
| LG18-22 | 4.0 [mm] | 17.5 [mm] | 21.5 [mm] | |
Installation Size: LG22-26 | ||||
| Order-No. | Total stroke in Ø | Clamping diameter d min. | Clamping diameter D max. | |
| LG22-26 | 4.0 [mm] | 21.5 [mm] | 25.5 [mm] | |
Installation Size: LG26-30 | ||||
| Order-No. | Total stroke in Ø | Clamping diameter d min. | Clamping diameter D max. | |
| LG26-30 | 4.0 [mm] | 25.5 [mm] | 29.5 [mm] | |
Installation Size: LG30-35 | ||||
| Order-No. | Total stroke in Ø | Clamping diameter d min. | Clamping diameter D max. | |
| LG30-35 | 5.0 [mm] | 29.5 [mm] | 34.5 [mm] | |
Installation Size: LG35-39 | ||||
| Order-No. | Total stroke in Ø | Clamping diameter d min. | Clamping diameter D max. | |
| LG35-39 | 4.5 [mm] | 34.5 [mm] | 39.0 [mm] | |
Installation Size: LG40-45 | ||||
| Order-No. | Total stroke in Ø | Clamping diameter d min. | Clamping diameter D max. | |
| LG40-45 | 6.5 [mm] | 39.5 [mm] | 46.0 [mm] | |
Installation Size: LG46-51 | ||||
| Order-No. | Total stroke in Ø | Clamping diameter d min. | Clamping diameter D max. | |
| LG46-51 | 6.0 [mm] | 45.5 [mm] | 51.5 [mm] | |
Installation Size: LG51-56 | ||||
| Order-No. | Total stroke in Ø | Clamping diameter d min. | Clamping diameter D max. | |
| LG51-56 | 7.0 [mm] | 50.5 [mm] | 57.5 [mm] | |
Installation Size: LG56-62 | ||||
| Order-No. | Total stroke in Ø | Clamping diameter d min. | Clamping diameter D max. | |
| LG56-62 | 7.5 [mm] | 55.5 [mm] | 63.0 [mm] | |
Installation Size: LG63-70 | ||||
| Order-No. | Total stroke in Ø | Clamping diameter d min. | Clamping diameter D max. | |
| LG63-70 | 8.0 [mm] | 62.5 [mm] | 70.5 [mm] | |
Installation Size: LG71-80 | ||||
| Order-No. | Total stroke in Ø | Clamping diameter d min. | Clamping diameter D max. | |
| LG71-80 | 10.5 [mm] | 70.5 [mm] | 81.0 [mm] | |
Installation Size: LG76-84 | ||||
| Order-No. | Total stroke in Ø | Clamping diameter d min. | Clamping diameter D max. | |
| LG76-84 | 8.5 [mm] | 75.5 [mm] | 84.0 [mm] | |
Installation Size: LG81-90 | ||||
| Order-No. | Total stroke in Ø | Clamping diameter d min. | Clamping diameter D max. | |
| LG81-90 | 11.0 [mm] | 80.5 [mm] | 91.5 [mm] | |
Installation Size: LG91-100 | ||||
| Order-No. | Total stroke in Ø | Clamping diameter d min. | Clamping diameter D max. | |
| LG91-100 | 10.0 [mm] | 90.5 [mm] | 100.5 [mm] | |
Installation Size: LG100-110 | ||||
| Order-No. | Total stroke in Ø | Clamping diameter d min. | Clamping diameter D max. | |
| LG100-110 | 11.0 [mm] | 99.5 [mm] | 110.5 [mm] | |
Installation Size: LG110-120 | ||||
| Order-No. | Total stroke in Ø | Clamping diameter d min. | Clamping diameter D max. | |
| LG110-120 | 11.0 [mm] | 109.5 [mm] | 120.5 [mm] | |
Installation Size: LG120-135 | ||||
| Order-No. | Total stroke in Ø | Clamping diameter d min. | Clamping diameter D max. | |
| LG120-135 | 16.0 [mm] | 119.5 [mm] | 135.5 [mm] | |
- Energy supply
axial axial and radial from LG35-39 - Fixing
by fit, thread and locknut - Robust, lightweight housing
Hard-coated aluminum alloy no overstretching of the rubber membrane at empty stroke - Direct gripping with rubber knops
high retention force due to good friction value, approx. 0.5 with rubber - Gripping with single-acting rubber membranes
low actuate effort reset when venting adjustable force with operating pressure (2 - 6 bar) - Inner core
saves air volume and cycle time (from LG35-39)