LKP4504FS2-A

Clamping element
Series LKP

  • broad range of products
    For all common profile rail guides
  • Energize to close (NO)
    Closing with pressure
  • high durability
    5 million static clamping cycles
  • Small and narrow design
    By using U-form piston
  • Maximum flexibility
    Additional air connection from front
Rail manufacturerRail typeRail sizeCarriage type
NSKRA(R1A)45RAA..ALshow variant
NSKRA(R1A)45RAA..BLshow variant
NSKRA(R1A)45RAA..EMshow variant
NSKRA(R1A)45RAA..GMshow variant
NSKRA(R1A)45RAA..ANshow variant
NSKRA(R1A)45RAA..BNshow variant
Operationpneumatic
Holding force3500 [N]
Operating pressure2 ... 6.5 [bar]
ConditionNO (Normally Open) open without pressure
PLUS connection possibleNo
Nominal operating pressure6 [bar]
B10d value5000000
Positioning accuracy +/-0,02 [mm]
Opening time0.08 [s]
Closing time0.035 [s]
Operating temperature-10 ... +70 [°C]
CertificationsLABS / REACH / RoHS
Weight1.3 [kg]
Functionclamping
Installation directionfrom the front
Air volume per cycle23 [cm³]
max. length clamping78
Connection typeThread on front side
AEPN
Power Units
Details
  1. Profile rail guide
    • Available for all common profile rail guides
  2. Wedge-type gear
    • Power transmission between piston and clamping jaw
  3. Clamping jaw
    • Pressed at the free surfaces of the profile rail guide
  4. Narrow housing
  5. Pneumatic piston
    • The piston moves the wedge-type gear longitudinally