LG1010-02SI
Internal gripper
Series LG1000
- Individually adjustable
The design of the gripper enables you to grip not only cylindrical gripping surfaces, but also conical and square ones with process reliability - Integrated air or vacuum feedthrough
Use this option for applications such as leak tests, purging or vacuuming your part - Surface protection provided by silicone membrane
In addition to covering a vast range of gripping diameters, the membrane provides ideal protection from damage
Equipment/Options
IP54
Maintenance free
Radial energy supply, through-hole
Technical Data
| Total stroke in Ø | 3 [mm] |
| Slip force max. | 53 [N] |
| Gripping diameter min. | 10 [mm] |
| Gripping diameter max. | 13 [mm] |
| Retract time / Extend time | 0.2 [s] |
| Operating pressure | 4 ... 6 [bar] |
| Nominal operating pressure | 6 [bar] |
| Operating temperature | 5 ... +80 [°C] |
| Air volume per cycle | 0.7 [cm³] |
| Certifications | LABS / REACH / RoHS |
| Protection to IEC 60529 | IP54 |
| B10d value | 500000 |
| Weight | 0.029 [kg] |
Individualizations
 | Use
Advantage
| Details | ||
 | Use
Advantage
| Details |
Benefits in detail
- Energy supply
- Axial (version-01) or radial (version-02)
- Mounting and positioning
- via fit, thread and lock nut
- Robust, lightweight housing
- Hard-coated aluminum alloy
- Direct gripping with rubber membrane
- High holding force due to high friction value
- reset when venting
- Through-hole
- Compressed air or vacuum connection for cooling the workpieces or testing them for leaks (version-02)
