ZK1065

Cutting Tongs
Series ZK1000
- Extremely lightweight
This light weight generally allows the use of a smaller moving axis, reducing the overall costs of the application in the process - Integrated magnetic field sensing
One of the few cutting tongs on the market that can have its position queried and transferred to the control system with process reliability - Decide for yourself!
Sprue or steel wire: The variety of cutting geometries and materials ensure you always find the correct cuttings
Equipment/Options
- 5 million maintenance-free cycles (max.)
- Spring opening O
- IP30
- Magnetic field sensor
Technical Data
Stroke per jaw | 6.5 [°] |
Gripping moment in closing | 400 [Nm] |
Closing time | 0.1 [s] |
Opening time | 0.4 [s] |
Operating pressure min. | 2 [bar] |
Operating pressure max. | 6 [bar] |
Nominal operating pressure | 6 [bar] |
Operating temperature min. | 5 [°C] |
Operating temperature max. | +80 [°C] |
Air volume per cycle | 130 [cm³] |
Protection to IEC 60529 | IP30 |
Weight | 0.67 [kg] |
possible cut-Ø max. plastics | 11 [mm] |
possible cut-Ø max. hard-plastic | 8 [mm] |
possible cut-Ø max. copper | 6 [mm] |
possible cut-Ø max. steel | 4 [mm] |
Accessory
Straight Fittings - Quick Connect Style GV1-8X8 | ![]() |
Angled Fittings - Quick Connect Style WV1-8X8 | ![]() |
Sensor holder KHD65 | ![]() |
Magnetic field sensor straight, cable 5 m MFS02-K-KHC-P1-PNP | ![]() |
Magnetic field sensor straight, cable 0.3 m - M8 connector MFS02-S-KHC-P1-PNP | ![]() |
Cutting Insert 15° for plastics BK1065-01 | ![]() |
Cutting Insert 0° For Plastics BK1065-02 | ![]() |
Cutting Insert 30° For Plastics BK1065-03 | ![]() |
Cutting Tong For Plastics BK1065-04 | ![]() |
Cutting Insert 0° For Steel BK1065-05 | ![]() |
Cutting Insert 30° For Steel BK1065-06 | ![]() |
Carbide cutting insert 0° for steel BK1065-07 | ![]() |
Carbide Cutting Insert 40° For Steel BK1065-08 | ![]() |
Cutting inserts, see page | ![]() |
Cutting inserts, see page | ![]() |
Benefits in detail

- Cutting insert
flexible applicable due to specific cutting geometry - Return spring
to open the cuttings - Mounting clamp
mounting and positioning of magnetic field sensors - Magnetic field sensor
for position sensing - Drive
single-acting pneumatic cylinder - Housing
Hard-coated aluminum alloy - Mounting and positioning
via fit, thread and lock nut - Energy supply