Cutting Tongs
Series ZK1000

  • Extremely lightweight
    This light weight generally allows the use of a smaller moving axis, reducing the overall costs of the application in the process
  • Integrated magnetic field sensing
    One of the few cutting tongs on the market that can have its position queried and transferred to the control system with process reliability
  • Decide for yourself!
    Sprue or steel wire: The variety of cutting geometries and materials ensure you always find the correct cuttings
  • 5 million maintenance-free cycles (max.)
  • Spring opening O
  • IP30
  • Magnetic field sensor
Technical Data
Stroke per jaw2.1 [°]
Gripping moment in closing14 [Nm]
Closing time0.01 [s]
Opening time0.1 [s]
Operating pressure min.2 [bar]
Operating pressure max.6 [bar]
Nominal operating pressure6 [bar]
Operating temperature min.5 [°C]
Operating temperature max.+80 [°C]
Air volume per cycle5 [cm³]
Protection to IEC 60529IP30
Weight0.11 [kg]
possible cut-Ø max. plastics2 [mm]
possible cut-Ø max. copper 1 [mm]
possible cut-Ø max. steel0.5 [mm]
possible cut-Ø max. piano wire0.3 [mm]
Benefits in detail
  1. Cutting insert
    flexible applicable due to specific cutting geometry
  2. Return spring
    to open the cuttings
  3. Mounting clamp
    mounting and positioning of magnetic field sensors
  4. Magnetic field sensor
    for position sensing
  5. Drive
    single-acting pneumatic cylinder
  6. Housing
    Hard-coated aluminum alloy
  7. Mounting and positioning
    via fit, thread and lock nut
  8. Energy supply