3-Jaw Concentric Grippers
Series GED1300
"The robust"
- Proven T slot guide
This established and proven guiding technology stands for the highest process reliability like no other - Integrated position sensing
You can detect the gripper status safely via the motor current using your control system - The simplest activation
The included control unit is controlled easily via plus and minus buttons, while you can optionally adjust the gripping force using the potentiometer
Series features
5 million maintenance-free cycles (max.)
IP40
External gripping
Internal gripping
Digital I/O
Gripping force safety device for spring
- Removable centering sleeves
quick and economical positioning of the gripper fingers - Gripper jaw
hardened steel individual gripper finger mounting - Positively driven curve disc
synchronized the movement of the gripper jaws high force transfer rapid stroke and force stroke (version with 6 mm stroke per jaw) - Drive
electric drive by 24 VDC step motor - Guide
precise T-Slot guide for high forces and moments capacity - Position sensing
measured at the end of stroke via power increase on the motor - Energy supply
standardized interface M8 round plug connection signal control line (use only cable without diode) - Robust, lightweight housing
Hard-coated aluminum alloy