ZK1045

Cutting Tongs
Series ZK1000

  • Extremely lightweight
    This light weight generally allows the use of a smaller moving axis, reducing the overall costs of the application in the process
  • Integrated magnetic field sensing
    One of the few cutting tongs on the market that can have its position queried and transferred to the control system with process reliability
  • Decide for yourself!
    Sprue or steel wire: The variety of cutting geometries and materials ensure you always find the correct cuttings
add to request cart add to compare
Equipment/Options
  • 5 million maintenance-free cycles (max.)
  • Spring opening O
  • IP30
  • Magnetic field sensor
Technical Data
Stroke per jaw4.25 [°]
Gripping moment in closing98 [Nm]
Closing time0.06 [s]
Opening time0.2 [s]
Operating pressure min.2 [bar]
Operating pressure max.6 [bar]
Nominal operating pressure6 [bar]
Operating temperature min.5 [°C]
Operating temperature max.+80 [°C]
Air volume per cycle32 [cm³]
Protection to IEC 60529IP30
Weight0.24 [kg]
possible cut-Ø max. plastics7 [mm]
possible cut-Ø max. hard-plastic5 [mm]
possible cut-Ø max. copper 2.6 [mm]
possible cut-Ø max. steel2 [mm]
possible cut-Ø max. piano wire1 [mm]
Accessory
Straight Fittings - Quick Connect Style
GV1-8X8
Angled Fittings - Quick Connect Style
WV1-8X8
Sensor holder
KHD45
Magnetic field sensor straight, cable 5 m
MFS02-K-KHC-P1-PNP
Magnetic field sensor straight, cable 0.3 m - M8 connector
MFS02-S-KHC-P1-PNP
Cutting Insert 15° for plastics
BK1045-01
Cutting Insert 40° For Plastics
BK1045-02
Cutting Insert 0° For Plastics
BK1045-03
Cutting Tong For Plastics
BK1045-04
Cutting Insert 0° For Steel
BK1045-05
Cutting Insert 30° For Steel
BK1045-06
Carbide cutting insert 0° for steel
BK1045-07
Carbide Cutting Insert 35° For Steel
BK1045-08
Cutting inserts, see page
Cutting inserts, see page
Benefits in detail
  1. Cutting insert
    flexible applicable due to specific cutting geometry
  2. Return spring
    to open the cuttings
  3. Mounting clamp
    mounting and positioning of magnetic field sensors
  4. Magnetic field sensor
    for position sensing
  5. Drive
    single-acting pneumatic cylinder
  6. Housing
    Hard-coated aluminum alloy
  7. Mounting and positioning
    via fit, thread and lock nut
  8. Energy supply