Clamping elements | manual
Series miniHK

  • small construction
    For all common miniature profile rail guides
  • Tool-free opening and closing (bi-stable)
    By turning the knurled screw
  • Maintenance free
    Up to 50,000 static clamping cycles
add to request cart add to compare
Matching rail / wagon combinations
Rail manufacturerRail typeRail sizeCarriage type
MISUMISEWZL (Miniature Wide)10(6,5)SEBWshow variant
MISUMISEWZL (Miniature Wide)10(6,5)SSEBWshow variant
IGUSTS-049TW-04show variant
HepcoMotionMLGB5MLGB..Cshow variant
HepcoMotionMLGB5MLGB..Nshow variant
INATKDM..-W(KUEM..-W..)5KWEM..-Wshow variant
INATKDM..-W(KUEM..-W..)5KWEM..-WCshow variant
THKRSR-W5WNshow variant
THKRSR-W5WMshow variant
IKOLWLF10LWLF..Bshow variant
IKOLWLF10LWLF..Nshow variant
IKOLWLF10LWLFC..Bshow variant
IKOLWLF10LWLFC..Nshow variant
NBSEBSW5Bshow variant
NBSEBSW5BYshow variant
THKRSR-W5WTMshow variant
THKRSR-W5WTNshow variant
CPCMR-W(MRU-W)5MR-WLshow variant
CPCMR-W(MRU-W)5MR-WLCshow variant
CPCMR-W(MRU-W)5MR-WNshow variant
CPCMR-W(MRU-W)5MR-WNCshow variant
Technical Data
Holding force40 [N]
Installation directionfrom above
Max. tightening torque0.07 [Nm]
max. length clamping14
Benefits in detail
  1. Miniature profile rail guide
    Available for all common miniature profile rail guides
  2. Stainless knurled screw
    For opening and closing the clamping unit
  3. Clamping jaw
    The floating bearings guarantee symmetrical application of force
  4. Housing
    in non corrosive steel